Custom Painters

Looking for a custom painter that uses our products? We know them!

We know there are many custom painters of railroad models, both plastic and brass, and military models who are using Tru-Color Paint for the majority of their work. If you are interested in the names of these custom model painters, contact us and we will be happy to help you locate 1 or 2 near you. Also, if you are a custom painter and use Tru-Color Paint we would like to hear from you. You can show off some of your work in the gallery section.

NOTE: Tru-Color Paint does NOT endorse any of the custom painters who use our product. It is up to the individuals involved in the transaction to do their due diligence between each other.

Contact us below today to get started!

Tru-Color Paint

623-551-2548

714-488-9779

 

Charles Harris

Used the old SMP AccuPaint years ago….these folks have taken that line and made this SOOOOO much better. This is the best model paint I’ve ever used and I’ve using model paints and an airbrush since 1975! Tried them all, solvent based, acrylics, water based, you name it. This stuff is the very best. Nice job guys!

John Henderson

Just started using TruColor. I love this paint…no disappointing results. Highly recommend this paint for anyone that wants to get it RIGHT!!

Mark Conca of Sunrise Trails Hobbies

On our new spray cans:
What a nice surprise on how well they work.

Pablo Bauleo

On painting a Eduard P-400 WWII airplane:
“They have good color density and they atomize fantastically. They do not obscure any surface detail and they are ready to spray out of the bottle. To top them off, the adhesion to plastic is outstanding. I highly recommended these paints to modelers of any experience level.”

 

Charles Landrum

IPMS USA National Review on AFV Club 1/350 LST-1:
“After spraying the Dark Rust, I let it sit for several days. I also shot a test wing to more fully abuse. The paint did not pull up after masking with an low tack adhesive tape. On my test wing I used harsher tape and still it did not pull. After masking and painting the boot topping on the hull, I painted with Model Master Acryl for the upper hull. After several days of curing I did have some pull up of Model Master Acryl, but not Tru-Color. I was totally satisfied with Tru-Color Paint in this application”.

John Gauthier

On painting HO-scale trains:
” Your product is second to none”

Error while sending mail. Success