Original equipment manufacturer

Original Equipment Manufacturers (OEM) are those companies that have designated and/or recommended that Tru-Color Paint be used to paint their models OR to be used with their decals OR who use Tru-Color Paint Exclusively on their products.

The following companies fall into this category:

Calumet Models – Custom builder of HO-, S- and O-scale traction, passenger and locomotive products.  630-323-7495

Clover House Decals – Manufacturer of N-, HO-, S- and O-Scale decals. 13123 E. Nixon Ave., Spokane Valley, WA 99216, 509-999-6247

Fusion Scale Decals – Manufactures of  N-, HO-, S- and O- Scale Decals,

Highball Graphics – Manufacturer of N-, HO-, and O-Scale decals. P. O. Box 57, Ossipee, NH 03890, 603-367-8637

NAFTA Scale Models – Manufacturers of N-, HO- TT-, O- and S-Scale 3-D printed add-on parts, freight cars and locomotives,

Protocraft – Manufacturer of Brass O-Scale freight cars. 18489 Half Moon St., Unit 203, Sonoma, CA 95476, 707-935-7011

Tim Bongard – Manufacturer of Fire Engine craftsman kits and Engine House details,

Westerfield Models – Manufacturer of HO-Scale cast resin and wood kits. P.O. Box 1479, Golden, CO 80402, 303-658-9343

Yesterrails Models – Manufacturer of freight cars specializing in the 1880-1920 period. 7515 Cortland Oak, San Antonio, TX 78254-5453, 210-688-9139

We are also supplying paint to several OEM’s who use our paint to color match for their end products.

Charles Harris

Used the old SMP AccuPaint years ago….these folks have taken that line and made this SOOOOO much better. This is the best model paint I’ve ever used and I’ve using model paints and an airbrush since 1975! Tried them all, solvent based, acrylics, water based, you name it. This stuff is the very best. Nice job guys!

John Henderson

Just started using TruColor. I love this paint…no disappointing results. Highly recommend this paint for anyone that wants to get it RIGHT!!

Mark Conca of Sunrise Trails Hobbies

On our new spray cans:
What a nice surprise on how well they work.

Pablo Bauleo

On painting a Eduard P-400 WWII airplane:
“They have good color density and they atomize fantastically. They do not obscure any surface detail and they are ready to spray out of the bottle. To top them off, the adhesion to plastic is outstanding. I highly recommended these paints to modelers of any experience level.”

 

Charles Landrum

IPMS USA National Review on AFV Club 1/350 LST-1:
“After spraying the Dark Rust, I let it sit for several days. I also shot a test wing to more fully abuse. The paint did not pull up after masking with an low tack adhesive tape. On my test wing I used harsher tape and still it did not pull. After masking and painting the boot topping on the hull, I painted with Model Master Acryl for the upper hull. After several days of curing I did have some pull up of Model Master Acryl, but not Tru-Color. I was totally satisfied with Tru-Color Paint in this application”.

John Gauthier

On painting HO-scale trains:
” Your product is second to none”